Spartan Environmental Technologies
www.SpartanWaterTreatment.com
www.SpartanWaterTreatment.com
Spartan Environmental Technologies, L.L.C.
7383 Lauren J Dr
Mentor, OH 44060
USA
Return to Previous Page
Phone: 800-492-1252
Fax: 440-368-3569
E-mail: info@ spartanwatertreatment.com
7383 Lauren J Dr
Mentor, OH 44060
USA
Return to Previous Page
Phone: 800-492-1252
Fax: 440-368-3569
E-mail: info@ spartanwatertreatment.com
| Ozone Generator Type "TPF" |
This page contains a general description
of the Type "TPF" Ozone Generator. The
TPF ozone generator employs the latest
electronic technology and permits
capacity increases by adding standard
modules. The TPF can supply from 250
to 24,000 g O3/hr from air or oxygen
feed. The following link provide more
detailed information:
of the Type "TPF" Ozone Generator. The
TPF ozone generator employs the latest
electronic technology and permits
capacity increases by adding standard
modules. The TPF can supply from 250
to 24,000 g O3/hr from air or oxygen
feed. The following link provide more
detailed information:
The TPF ozone generator consists of a cylindrical vessel in which a number of stainless
tubes are welded between two fixed plates in a compact arrangement. A coolant flows
around the outside of the tubes to remove heat produced in the generation of ozone.
The tubes serve as receptacles for calibrated high voltage electrodes with one tube and
one high voltage electrode forming an ozone generating dielectric element. This method
of construction prevents any possible contact of the coolant with the high voltage
electrodes.
The tube’s inside diameter and the high voltage electrode’s outside diameter create a well-
defined gap. The feed gas flows between the electrodes in this narrow gap where ozone is
formed at the required concentration. Each ozone generating element has its own fuse
that ensures the selective disconnection of a defective element from the others without
any interruption in the process.
Power rack modules constitute the main power supply unit (PSU). Each PSU is
constructed in compliance with the latest IGBT technology. A Programmable Logic
Controller (PLC) checks each operation and instrument. A touch screen panel controls
the PLC and a RS 485 serial port permits remote control and monitoring of the process.
FEATURES:
tubes are welded between two fixed plates in a compact arrangement. A coolant flows
around the outside of the tubes to remove heat produced in the generation of ozone.
The tubes serve as receptacles for calibrated high voltage electrodes with one tube and
one high voltage electrode forming an ozone generating dielectric element. This method
of construction prevents any possible contact of the coolant with the high voltage
electrodes.
The tube’s inside diameter and the high voltage electrode’s outside diameter create a well-
defined gap. The feed gas flows between the electrodes in this narrow gap where ozone is
formed at the required concentration. Each ozone generating element has its own fuse
that ensures the selective disconnection of a defective element from the others without
any interruption in the process.
Power rack modules constitute the main power supply unit (PSU). Each PSU is
constructed in compliance with the latest IGBT technology. A Programmable Logic
Controller (PLC) checks each operation and instrument. A touch screen panel controls
the PLC and a RS 485 serial port permits remote control and monitoring of the process.
FEATURES:
- Compact design and modular electronics
- Individually fused dielectric elements
- Stainless steel hydraulic connections
- Skid mounted PSU and control connections
- Process instrumentation included
- PLC with touch screen control panel.